tC gauge installation instructions.
Installation:
I. Tools Needed
- A. Flat screwdriver or fork
- B. #2 Phillips screwdriver
II. Removing Speedometer Cluster
- A. Pull on housing to remove, as it is only held in with clips
- B. Using the Phillips, remove the one screw on the upper part of the speedometer assembly.
- C. Disconnect the connector on top of the speedometer and gently pull the speedometer housing out of the dash.
III. Changing Speedometer Face
- A. Remove the black piece and clear plastic.
- B. Using the flat screwdriver or fork, gently slide under the needles and remove. Then remove the gauge faces.
- C. insert the new gauge faces and re-install the black plastic piece to hold the gauges in place. Then install the needles.
IV. Reverse procedure to re-install
